Rancangan Meja dan Kursi Sortasi RSS (Ribbed Smoked Sheet) yang Ergonomis Menggunakan Pendekatan Anthropometri (Studi Kasus PTPN XII Banjarsari)
(Design of Ergonomic Tables and Chairs on the RSS (Ribbed Smoked Sheet) Sortation Process Using Anthropometric Approach (Case Study in PTPN XII Banjarsari))
Embedded Files
Ida Bagus Suryaningrat
Prodi Teknologi Industri Pertanian, Universitas Jember, Jember, Indonesia
Noer Novijanto
Prodi Teknologi Industri Pertanian, Universitas Jember, Jember, Indonesia
Nadia Putri Irkhana
Prodi Teknologi Industri Pertanian, Universitas Jember, Jember, Indonesia
DOI: https://doi.org/10.19184/j-agt.v12i02.9280
ABSTRACT
Rubber is an export commodity which gave the country’s contribution in increasing Indonesia's foreign exchange effort. PTPN XII Banjarsari isone of the industries which process the latex material. From the whole processing stages, the sorting-part workers were the workers who complained the most about work discomfort. A sorting table with no cavities for the feet would caused workers complain about knee and calf pain. This study aimed to redesign the sorting chair and table based on the anthropometry principle. This research was expected to create table and chair sortation design that can reduce workers’ complaints in order to increase productivity and reduce human error. The data collecting method was done by 3 steps, they were interview, questioner, and direct measurement. Then, the obtained anthropometric data was made into the most appropriate sorting design of chair and the table based on the worker's posture and it was tested on the employee’s complaints, productivity and human error. The results showed that the redesign of the tables and chairs on RSS sortation caused the complaint of sorting workers in PTPN XII Banjarsari decreased. Productivity increased to 8.6%. Human error had decreased, before the redesign it was 8.1% and decreased to 1.9%. The lighting source before redesigned did not fulfill the lighting standard, therefore the redesigned lighting source used an 8 watt LED flourecent with average intensity of 685 lux. It was compatible with the lighting standard to do work that requires average intensity between 500 to 100 lux (Kuswono, 2014).
Keywords: anthropometric, ergonomic, RSS
REFERENCES
Nurmianto, E. 1998. Ergonomi, Konsep Dasar dan Aplikasinya. Candimas Metropole, Jakarta.
Kuswono, W.S. 2014. Ergonomi dan K3 (Kesehatan Keselamatan Kerja). PT Remaja Rosdakarya, Bandung.
Kementerian Pertanian. 2015. Statistik Perkebunan Indonesia. Direktorat Jendral Perkebunan, Jakarta.
Madyana, A.M. 1996. Analisis Perancangan Kerja dan Ergonomi. Universitas Atma Jaya Yogyakarta, Yogyakarta.
Rusdianto, A. S., I. B. Suryaningrat, dan I. H. Subhan. 2012. Analisis aspek ergonomi pekerja bagian sortasi akhir pada pengolahan kopi robusta secara semi basah (Studi kasus PT. J.A. Wattie Perkebunan Durjo Jember). Jurnal APTA, Jember: FTP- Unej.
Wignjosoebroto, S. 2000. Ergonomi Studi Gerak dan Waktu. Editor I Ketut Gunarta. Guna Widya, Surabaya.
Published
20-12-2018
Issue
Vol. 12 No. 2 2018: Jurnal Agroteknologi
Pages
149-157
License
Copyright (c) 2018 Jurnal Agroteknologi
How to Cite
Suryaningrat, I.B., Novijanto, N., & Irkhana, N.P. (2018). Rancangan meja dan kursi sortasi RSS (ribbed smoked sheet) yang ergonomis menggunakan pendekatan anthropometri (studi kasus PTPN XII Banjarsari). Jurnal Agroteknologi, 12(2), 149-157. https://doi.org/10.19184/j-agt.v12i02.9280
Page updated
Report abuse